| Application of high pressure cleaner in industrial cleaning field | |
| 2021/7/7 | |
| The cleanliness of industrial equipment directly affects the operation and efficiency of industrial equipment, so industrial cleanliness is particularly important. The working medium of the high-pressure cleaner is clean water, no chemicals are added, and only the striking force of the high-pressure water jet can be used to remove the attachments. Therefore, the application range of high-pressure cleaners is very wide, covering almost all areas of the national economy. The following are typical examples of the application of high-pressure cleaners in casting sand cleaning, descaling, and airport runway glue removal, as well as the pressure and flow parameters used in general engineering cleaning. 1. Casting sand cleaning: In the casting sand cleaning operation, it is most suitable to choose a high-pressure cleaner with a working pressure of 600bar and a flow rate of about 30L/min. machine. 2. Pipeline descaling: In the pipeline descaling operation, it is most suitable to choose a high-pressure cleaner with a working pressure of 750bar and a flow rate of about 50L/min. 3. Airport runway degumming: In the airport runway degumming operation, it is most suitable to choose a high-pressure cleaner with a working pressure of 750bar and a flow of about 50L/min. The plane rotator is preferred, which can greatly improve the cleaning efficiency. 4. Derusting of mechanical parts: In the derusting operation of mechanical parts, a high-pressure cleaner with a working pressure of 200bar and a flow of about 20L/min is selected, and a pre-mixed abrasive tank is installed at the high-pressure water output end of the high-pressure pump, and the pre-mixed abrasive water jet is used. Rust removal operation. 5. Steel rust removal: In the steel rust removal operation, a high-pressure cleaner with a working pressure of 500bar and a flow of about 38L/min, equipped with a sandblasting device, uses a mixed abrasive water jet for rust removal. 6. Shell-and-tube heat exchanger: In the cleaning operation of the shell-and-tube heat exchanger, it is most suitable to choose a high-pressure cleaner with a working pressure of 750bar and a flow rate of about 50L/min. 7. Boiler: In the boiler cleaning operation, it is most suitable to choose a high-pressure cleaner with a working pressure of 750bar and a flow rate of about 50L/min. 8. Sewer: In sewer cleaning operations, it is most suitable to choose a high-pressure cleaner with a working pressure of 280bar and a flow of about 74L/min. The rotating nozzle is preferred, which can greatly improve the cleaning efficiency. 9. Oil tanks and dispensers: In the cleaning operations of oil tanks and dispensers, it is most suitable to choose a high-pressure cleaner with a working pressure of 800bar and a flow of 84L/min, and is equipped with a three-dimensional rotating nozzle to achieve 360 full coverage cleaning. |
|
|
|
